One of the best ways to prevent snow from sliding off metal roofs is with snow retention systems. Snow can slide off your roof without snow guards, snow rails or any other form of snow fence.
Steps to Install Snow Guards on a Roof
Installing snow guards on a metal roof is an important step in protecting the roof and preventing damage from snow and ice accumulation. Here are the steps to install snow guards on a metal roof:
- Determine the placement of the snow guards: The placement of the snow guards will depend on the slope of the roof, the amount of snowfall in the area, and the size of the roof. Typically, snow guards are placed at least two feet from the roof edge and spaced evenly across the roof.
- Clean the roof surface: Before installing the snow guards, the roof surface must be cleaned of debris, dirt, and any other obstructions. This will ensure a clean and secure surface for the snow guards to be installed on.
- Attach the snow guards: Snow guards can be attached using screws or adhesive. If using screws, use a drill to make holes through the metal roof and attach the snow guard with screws. If using adhesive, apply the adhesive to the bottom of the snow guard and press it firmly onto the roof surface.
- Repeat the process: Continue to install snow guards across the roof, spacing them evenly according to the manufacturer’s instructions.
- Test the installation: Once the snow guards are installed, test the installation by pouring water on the roof to simulate rainfall. This will ensure that the snow guards are securely attached and will hold up against the weight of snow and ice.
This article was written by a roofing professional at Roofing.co. At Roofing.co, we’re determined to be the only one you need to hire when looking for a Clearwater roofing contractor. We take a modern, professional approach to the roofing business in order to ensure our customers in St. Petersburg and the Central Florida region have the best possible experience whenever they choose us.